Photos of 51 Tatoosh (Meridian), Elliott Bay

Original rails with Cetol after general weathering.

Used a heat gun to scrape wood down to bare and then a chemical remover (on
the right) to help remove Cetol from in between wood grain.

This is a photo of water stains on bare wood. We used a light wood bleaching
solution to clean wood and bleach out water stains.

Rails taken down to bare wood, ready for varnish.

This is with two coats of varnish. We plan to add three more coats for a
total of five. This will provide a good amount of UV protection while
sealing the wood from weather.
<<return to main Photo Gallery page |